Features and Options:
- Programmable via DIP switches at installation time
- User selectable counts per revolution
- English bore size from 0.250″ to 1.000″
- Metric bore size or 10mm to 25mm
- Exclusive “Anti-Jitter” option
- Made in the USA
The model HRL-P is an incremental hollow shaft encoder with up to a 1″ (25mm) blind shaft bore in a heavy duty aluminum housing that mounts directly on an existing shaft assembly. A flexible mounting bracket or tether allows the encoder to float on the shaft without rotating. It generates up to 3 square wave outputs depending on factory installed program and options, and on DIP switch values set at installation time. The types of outputs are based on shaft rotation as follows:
Pulse Output: A Single output (A) with a specific number of counts per revolution (cpr) of the shaft; Dual outputs (A and B) with two independent outputs and the cpr on A can be different than the cpr on B; or Triple outputs (A, B, and C) with three independent outputs.
Quadrature: Two pulse outputs, A and B, have the same cpr and are in quadrature relation to each other (A leads B by 90° for clockwise rotation as viewed from shaft end farthest from connector). Indicates distance and direction of shaft rotation to any control device that accepts quadrature inputs.
Zero Marker Output: Provides a zero reference or index pulse on output Z occurring once per revolution, having a pulse width approximately equal to a pulse on output A.
Direction Output: Indicates the direction of shaft rotation, clockwise or counter-clockwise.
Minimum Speed Output: Indicates when the shaft exceeds a predetermined revolutions per minute (rpm).
Anti-Jitter feature: is designed for conveyor and web systems requiring continuous and accurate measurement of the web’s movement even if the system must be stopped and restarted without reset. When the web stops, and if there is sufficient vibration or back-and-forth movement, then the encoder output could oscillate, appearing as if the web were actually moving. Anti-jitter eliminates this condition by significantly increasing the pulse hysteresis.
Call or visit our website for details about currently available programs, and to inquire about new features to meet your specific application needs.
|Conveyor Manufacturers||Printing and Labeling||Custom Machine Builders||Packaging|